942 and SW64 WITH LEGACY LNB

[ToUgHsPot]

Can anyone confirm that since my SW64 allows for up to 4 receivers to be connected, can I simply use 2 of those "output to receiver" from the SW64 to connect to the 2 tuners of the 942 receiver. Would this work???

Please no mention of , " WHY NOT JUST GET A DPP TWIN LNB?" Cause its not that easy living on the island (if you know what I mean ) Here we have to use what we have...

 

[BobaBird]

Yes, you can. If your legacy LNB/switch combo has the capacity to feed all the satellites you need to all the tuners you have, there's really no need to convert to DishPro.

 

[ToUgHsPot]

Yes, you can. If your legacy LNB/switch combo has the capacity to feed all the satellites you need to all the tuners you have, there's really no need to convert to DishPro.

Thanks bud, that's just what I needed to hear. Some good news for a change to help me cope with this TERRIBLE hang-over!!!!

 

[calikarim]

Legacy with 942

I have a SW64 switch, legacy with my old 6000 and just converted to a 942. I used two of the outlets of the 64 to feed signals to my 942, and each of the other two lines to older SD receivers and receive perfect signal, no interference. legacy works fine with the 942

 

[datwell]

Mine works just fine!
--Doug