Search results for query: *

:bow

Thank you Titanium. Now, a question. How can a computer -- (since computer power supplies have 12V) -- supply 18V to an LNB?

Doesn't Kaffeine scan? Except I have to code in all the TPs. There is a scan app from one of the users but I never installed it because I'd need to build his kernel and that failed for me.

With the DiSEqC switch I would then use my Kaffeine app and change tuner, right? Does a DiDEqC switch send power thru all ports so that both my LNBs will get power? I've tried the configuration you mention with the splitters before. I original did it with an FTA set-top box and it worked...

It says it has two tuners. The card appears to have two connectors. Are they BOTH for LNB in? So one could be a KU LNB and the other a C LNB? Does this card provide power to the LNB? And if I have two LNBs input, one to each connector, does it power BOTH LNBs? Is there a LINUX driver? I would...

Does this tell me it has tuned and locked:? dad@Dad-Stubuntu:~$ tune-s2 4000 H 29125 -committed 1 -lnb CBAND -system DVB-S2 -modulation 8PSK -fec 5/6 -rolloff 0 LNB: low: -5150 high: 0 switch: 0 opening: /dev/dvb/adapter0/frontend0 LOW band 22khz OFF DiSEqC: e0 10 38 f0 00 00 length: 4...

OK, I used your tune-s2 tool and here's what I got. It shows tuning status as unlocked. I wonder if you can explain what's going on? I specified an S2 system and it returned DVB-S. I specified 8PSK and it returned QPSK. I really don't know what rolloff, pilot and MIS are, but I didn't know...

I checked the Sky Star and it doesn't say it works in Linux. I'd like to run in Linux. Your drivers are in your software? Which of your software?

For now, the reason I use the splitters is because there are some clear digital channels on C-band SatMex 8 on the DSR-922, so I can verify my C-band lnb works. I haven't found clear Ku-band channels (yet) for my DSR-922 to verify the KU-band lnb works. Once I get both my lnbs working I'll...

Hardware-wise I described as above: The c-band and Ku-band come in on two different co-axs from two different PLL LNBs that share a feedhorn on a 10' dish. I use a DSR-922 to move the dish and control the polarity. Both co-axes go into hi-freq splitters with DC-block on one side (goes to a...

Can anyone suggest a better card? It was tuning S2 on C-band just fine. It could not tune KU-band. I switched things up and put a signal strength meter in-line with the Ku and plugged the Ku directly in to the card, not using splitters or a switch, and the C-band was still on the splitter and...

Running wscan-s2 gives confusing results. Remember, I am using the DSR-922 to control the polarator. I ran this and see why I get confused? dad@Dad-Stubuntu:~$/home/dad/Downloads/blindscan-s2-master/blindscan-s2 -b -s 11737 -e 11737 -r 8333 -V -d 5 -l 10750 -v Tuning LBAND: 987 11737 V 8333...

Yes, a low-cost in-line meter The meter is low cost and in-line. It beeps when a scan is in process, and a red light comes on when the card sends the 22khz. If I've got the right LOF (10750) and I get a signal but no SNR > 0%, but the card can tune my C-band LNB OK, does that mean the...

ke4est, Please explain I don't understand your question. I have a coax from a KU-band lnb plugged into a signal strength meter, and from there I have a coax connecting the meter to the TBS6925. The meter shows a very good signal from the lnb. Software shows a signal from the lnb...

KU-LNB It is a legacy lnb, not lnbf. It shares the feedhorn with the c-band lnb. It has its own coax coming into the house, so there are TWO coax coming in from the dish. I will go to the dish, remove the feedhorn cover, (hopefully no wasps in there!!!) and double-check the specs. But I...

Th results I connected my Ku-band lnb thru my signal strength meter directly to the TBS6925; no C-band or DiSecQ switch. Results the same. Meter and software both show good signal strength coming from KU lnb, but SNR is always 0%. Why would I always get 0% SNR on my Ku-band lnb? When I...

I verified S2 does work on C-bnad on the new card. But still no luck with Ku on any Sat or TP. I have a Sat finder signal strength meter that I'm going to hook up to my Ku feed. Maybe my Ku LNB is dead? I haven't tried sending the Ku feed directly to the card yet, so that is also on my list...

I have tried to install your software. I ran the gui and tried to specify the desired config. It generated a new kernel and updated the GRUB2. It did keep my original kernel and it actually put the new on in a multi-level GRUB2 menu. But the new kernel won't boot. (Posted on a different...

They replaced the card! I sent the card to the specified address. They sent me a new one (or repaired mine?). So now I guess I'm experiencing the problems many have complained about that the TBS-6925 has trouble controling a DiSeqC switch. As I mentioned, all I have is two LNBs: one C-Band...

Finally gave up on taxes and I'm back in Linux. Still haven't removed it, so here is the only thing in the log that refers to the TBS6925: Feb 24 18:46:44 abcdefubuntu kernel: [ 42.348619] SAA716x TBS 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Feb 24 18:46:44 abcdefubuntu...

Thanks updatelee. Nope, no frontend0. It is a TBS6925, so it's not a quick unplug/replug. I booted to windows and it says it can't initialize the card. It knows it's there, but it can't initialize it. When I get re-booted into Ubuntu I'll post the results you told me to do. I do think it...

Thanks updatelee. Nope, no frontend0. It is a TBS6925, so it's not a quick unplug/replug. I booted to windows and it says it can't initialize the card. It knows it's there, but it can't initialize it. When I get re-booted into Ubuntu I'll post the results you told me to do. I do think it...

PS: now, in /dev/dvb/adapter0 there are only net0, demux0 and dvr0. I can't find anything called headend0 on my computer anywhere. And in Kaffiene when I try to configure the device it says STV090x Multistandard and it says "device not connected". What does all this mean? The C-band co-ax...

Anyone have any experience with having to return a TBS6925?

Any comments on OpenBox x5 STB? It has component out for older systems.