Search results for query: *

  1. R

    Coolsat not receiving higher Ku frequencies

    The BSC-621-2 LNBF has a loop from the C band section that connects down to a connector on the Ku section of the LNB. Where these come together, I assume is a DiSEqC switch, and then one cable goes down to the Coolsat. I don't have a DiSEqC switch in the line. There is a single cable from the...
  2. R

    Coolsat not receiving higher Ku frequencies

    I understand and that makes sense. It's telling the LNB to receive C band when set to 1 and to look at Ku, when set to 2. When I set the DiSEqC to 2, I don't receive any signal. Since I have the option of 3 DiSEqC settings, I've tried a blind search with each of them and with all of them set to...
  3. R

    Coolsat not receiving higher Ku frequencies

    Two thinkgs. When I set the Disque for 2/4, I don't get any satellites. Second, after looking at the info I'm getting from the Coolsat vs Lyngsat has, I don't think I'm getting ANY Ku transponders. For example,on a blind search, the Coolsat lists NY Legislature (a C band digital ) as 11677 V...
  4. R

    Coolsat not receiving higher Ku frequencies

    Man, thanks for continuing to help. There should be an easier way. OK, here's the settings I tried: LNB - Single LNB Freq - 10600 22KHz - On DiSEqC 1.0 -1/4 In a blind search, I got a Ku digital frequency as high as 12160, so that's progress. However, when I went back and did a manual search...
  5. R

    Coolsat not receiving higher Ku frequencies

    No, I'm not using a 22KHz switch, that I know of. The 22KHz setting is turned off on the Coolsat and I tried blind scanning with the 4DTV turned off, just in case.
  6. R

    Coolsat not receiving higher Ku frequencies

    I've tried the LNB at all the settings possible on the coolsat. That includes: single, universal, lo =9750, hi=10600 and hi=10750.
  7. R

    Coolsat not receiving higher Ku frequencies

    Sorry for not including all the info. I have a BSC621-2 - Built-In DiSEqC Switch Universal Ku Low L.O. - 9750 Ku High L.O. - 10600
  8. R

    Coolsat not receiving higher Ku frequencies

    Thanks for the note, Iceberg. When I set the LNB to SINGLE, I don't receive any signals. With the LNB on UNIVERSAL 9750/10750 I receive signals. I tried a blind search for the Pentagon channel and a manual serach, also. Each time the message is No Channel Founded.
  9. R

    Coolsat not receiving higher Ku frequencies

    Thanks for responding. The lnbf is a BSC 621 I'm receiving both H and V transonders It happens on all satellites I just bought the coolsat and I haven't updated the firmware. I'm receiving C band analog and I'm receiving C band digital I'm receiving Ku band frequencies lower than 11900
  10. R

    Coolsat not receiving higher Ku frequencies

    Hey Guys, I'm new here and looking for advice. Please let me know if I should do this in another location on the site. I'm trying to find a specific digital Ku feed that like AMC 1 tp 20 , the Pentagon Channel. It doesn't show up when I do a full blind search or a manual search. I've got a 3m...