Search results for query: *

Thanks for the quick reply.... dissappointing that the only NBC is on East Coats with me :( I was hoping for a West Coast version (or some other zone...) Thanks again

The main reason I went to FTA was to have more locals (For program conflicts and missed, so we can watch an hour later/etc). Im on th East Coast so I have those, but having more Fox affialiates is great too.... I know LyngSat has information but not all the affiliates have all the info...

I guess thats why the .3 LNBs go for $30 instead of $10 - You get what you pay for.... Thanks for the help and explanation So, now my internal conflict - Will the .3 lower noise LNB be worth $30 in TP gains....

:) That makes perfect sense! Thanks!

Thanks again guys! As always .... Heres my LNB Specs : Standard single LNBF FREQUENCY RANGE HIGH BAND 11.70 ~ 12.2 GHz L.O. FREQUENCY 10.75 GHz L.O. FREQUENCY STABILITY +/-1.0 MHz (MAX.) @ +25 degree C OUTPUT FREQUENCY RANGE 950~1500 MHz NOISE FIGURE: 0.6 dB (max)...

I finally got my FTA setup running - Thanks to all that helped!!! Now I have some issues when I add a few TPs on Amc4 - I want more locals and there are a few NBCs on : 3860 H tp 8 26670 I enter the 3860 and the 26670 in but I get no TP Signal or Quality - In fact, any TP I enter with...

I finally got it! Thanks for the help! FTA beams are damn narrow, 2 degrees either way and no more signal ... not like Dishnet/Direct signals... I pick up all birds now - but some TPs are weak, on G10 the TPs with the locals I want get like a 20% signal, but other TPs get 60% ... Any way to...

Yes I did - Direct to LNB .... Going to work on it more tomorrow - tired of being on the ladder all day :)

Its only a signal LNB - Rather than remove the motor can I set it to a degree that would be straight?

Bad LNB? Could all my issues be a bad LNB? Ive never had such an issue pointing a Dish before, you would think I could get at least AMC5 to give a quality. I have a dual polarity Standard LNB and on my Pansat 2500 I have Standard selected with : LNB Freq : 10750 22K : off Diseqc : off...

Ah, maybe this is my issue? OK, Gave up on the computer for the signal and picture and I got a Pansat 2500 clone so I can get a good meter reading. On AMC5 I have a 95% Signal and 0% Quality (I know, Signal means nothing - Quality is EVERYthing). I have the right coordinates but I just...

Thanks! Ive seen odd things with Progfinder as well - I hope with this new information I can get AMC5 tonight. (Not that theres anything I want to watch on it, but I need it to start) I have another question - Progfinder says AMC5 is at 40 elevation. My SG2100 is at 47 and my Declination...

oooooo - Progfinder II is nicer than the Progfinder I was using. Now the Parameters say : LOF1 : 9750 SW : 11700 LOF2 : 10600 These are different than yesterday - do these look good?

Thanks Pete ... I remember my first Dish with a skew - that was rough - Now they are cake. In progfinder it has settings for LOF1 of 12500 and sw 12700 LOF2 0 - Are these correct for my Standard KU LNB? For TP1 on AMC5 it has 11740000 - v - 11110 Lyngsat says 11742 for the TP. I...

iammike, Yeah I connected Progfinder, but it could have been old - Ill check the TP settings tonight when I try, yet again, to get a signal. Thanks!

Thanks for the reply. WOW! So I did find the right settings :) - I guess thats good and bad since I can't get a signal on that sat. I was using a signal meter, used them all the time for Direct and Dish setups (been awhile, but they worked great for that). I could try to use the...

I've read alot of great discussions on FTA setups and it has helped me alot, but I need more individual help ... I hope - I'm in the Buffalo NY area (Depew to be exact 14043) and Im trying to point my SG2100 with my 31" FTA dish true south which should be +12 (so 192) and my other settings...