Search results for query: *

It is working perfect! You know I had to go into the rotator and solder the coax contacts to the board, they were either a snap type fit are were just poorly soldered and I was loosing contact at times. (simple fix). The only other complaint I had was the performance of the remote control, the...

Fixed! Drill a hole in that dark front panel, it pops out once the cover is removed. See photo

The only complaint I have is the remote has poor range about 6-7 feet. (half way to the recliner). Anyone have this problem?

How would I know if they are actually broadcasting "LIVE" right now? I have no quality on that sat. No obstructions, I live near Galveston, Texas, Highest mountain is a ant hill.

Here is the pic.

real good

I don't know what the term "Live channel" means?

I think I found out why I had so much trouble ever finding a signal in the first place. I noticed that when I was hooking up the signal strength meter that I had to rotate the coax connector to the left to get a signal and a polarization light? if it move to the right I would loose the...

Try using another frequency that is LIVE on G10R' What does this mean? Pete What do these #'s mean? 227.3 223.

Can't find, G10R .... 123 W Rechecked pole alignment, the rotor alignment and the dish. I find the best settings for G3 to be right on the money, the same settings Pete gave me and it was the same in the manual also. I have used USALS to find G10R and then bump the rotor and still can't find it?

"Hit the Audio button (speaker picture) then left or right arrow until you select the correct audio channel" no luck with this?

that's where I am at

Some channels have a great picture but no sound?

OH ! I never took the motor off of the vertical setting. I need to go back to my south sat. and reset the rotor to the settings you gave me, also reset the dish. Right now it is more or less just rotating in the same plain.

Whats the best sat.? Programming?

When I hooked up the motor nothing changed, which is good. Can I use USALS, when I do the quality disappears? Zero the motor?

Keep eye on Quality and max it out (L and R arrow), then store the (numbered) position! got this done. I guess it stored the #29, do I need to recall it when I return to the sat.?

I need to hook the motor back up first, It's still there but bypassed

You know it's been cloudy here since I got this, clear now. This level of cover would have not stopped the Direct TV I had years ago. Is it the same with this?

Chinese

I have tv!!!!!!!!!!!!!!! CCTV4 -- real clear

DiSEqC 1.2 and tweak the signal by nudging the dish. Nudge it with the motor? How

85% done

between TV and radio it has the # 66