Search results for query: *

Ok, got Echostar 7 , that's close to the center of the LNB rack, it I'm astonished, it looks as if the dish is pointing at the ground but the signal is strong and reception is really good, not many free channels though, I'll keep the cable tv for now. As I want to get 8 satelites, I'll make sure...

I'm not sure on how to set the elevation angle on the T90, I set it to 28 degrees, but, it's kind of looking down, like its shaking its head in shame at my feable setup skills! Where is the 0 degree horizontal plane, there's no markings for elevation, I need some kind of reference point to...

Hello again, Have my T90 mounted and now it's time to find some satellites, I used the Satlex site for the toroidal dish, i gave my Lat 55.7353 and long 97.8633 and the satellites I wanted Nimig 2 over to Anik F3 40 degree spread, lots of satellites between the two. Problem is, the elevation...

Yes, thankyou for posting this, The more I posted about this subject, the more confused I seemed to get. John

The Split In the Larry1 attatched thumb, woulc I just use a splitter off the ecoda swtich enabling me to have 4 RG6 cables running into the house?

ecoda So, I connect the 1x4 diseqc switch to the ECODA 22KHz switch to feed the 4 recievers? John

Quads All I want is 5 LNB's on my T-90, whatever LNB works will do, just want to run 2 cables in for the 2 Nfusions and 2 more for the Captiveworks 3000, as for sats, 5 is just a bang number off the top of my head, can't remember the names of all the sats, just want to avoid a cabling nightmare...

Invacom LNB Would the Invacom work, my understanding is ,the LNB needs to be Linear, the Invacom has two linear and two circular, would these be compatible with the T-90 dish? I like your solution, seems very simple, I'm new to FTA and have wasted money, this part of the setup is critical...

That sounds good, so, would I need a 4x4 multi-switch for each reciever along with a diseqc, just want to avoid running all these cables into the house, just want to have my connections arranged so as to have one RG6 cable coming in for each reciever. I'm new to this, if you have time and could...

Ok, have my T90 dish, now, if I use quad LNB's (5), would this not be one way of getting one RG6 cable to each reciever(3)? I assume, with 4 RG6 hook-ups on each LNB, would allow me to run 1 RG6 cable to each reciever with the proper switches ect. Is this just a brain fart, or, can this be...

4 LNB into 1 I have to decide if I'm going to order the T90 dish or just a round 35" motorized dish, the t90 seems like it's going to be a wiring nightmare to all the recievers but if I can figure a way of cabling it, that may be the way to go, I'll be doing lots of research on the cabling...

4 LNB into 1 Thankyou so much for the help, first off, I'll have to sell my t-55 and upgrade to the t-90. I'm north of the 55th in northern Canada, way up there, in the winter it goes down to -40 degrees, not much to do in the winter months, I would like to spend the summer toying around with...

Ok, that's what I want, some who will cut right to the chase, Like I said I don't have much experience! I had T55 tech support email me the satelites I could pick up, the number was 4, so, what your telling me is, my reception will be very poor to no-existant. Sounds like I should have bought...

Just bought the equipment Just bought this equipment, nothing is set up as of yet, just trying to get everything I need to do the installation, want it to be painless as possible. Don't know about the Nfusion recievers, a friend has the Captiveworks 3000hd and loves that unit, I'm a computer...

Help, I have a t55 dish with 4 LNB and want to somehow channel those 4 into 1 so I only have one cable coming into the house and then split them back into 4 so I can hook 2 RG cables up to my Captiveworks 3000hd and then feed the remaining 2 RG6 cables to to my other 2 Nfusion recievers. Just...