Search results for query: *

Just to make things clear. My problem was wrong LNB that I have received with the system. I have got LNBC, which is circular and should be linear. I have replaced LNB and it works fine.

Well, without the booster i get not get signal.

I have about 120 feet from my receiver to DiSEqC Switch (4 x 1), then about 10 feet to rotor. in front of the switch i have inline amplifier, to boost my signal. my problem is that the rotor does not response to the receiver. any suggestion?

OK, i have tried everything and nothing works. I have read on other thread that there are two kinds of lnb. Linear and circular. I got with my receiver CS-LNBC wich I belive is circular. To receive signal from Telestart 5 and other linear sats i will need linear lnb. I just need somebody to...

OK i will keep rotor elevation at 39, now how do i find dish elevation, and should i turn rotor to desire position as they say in the manual, and then look for signal. Or keep this at 0 position..

Arion I understand that i have to set dish correcttly to one of the sats, preferablly the one that is closest to true south. but my problem is that next to amc5 79w, that is my almost true south, there is nimiq2 82w, which has strong signal and every time when i move arround i find nimiq 2 no amc5.

so what dish elevation should i use, and what skew should be? I have KU lnb.

Well, as you can read in my initial post i can find only few sats (nimiq 1.3, 2 and echostar 7, 8). Could be something with lnbf?

What do you mean "find and store"? Pansat has most of those sats preset.

OK, I have looked around and cannot find the answer. I have got my system from FTAdirect. It is PanSat 3500s (mostly because of your review). It came with Fortec Star 33” dish, HH90 rotor, CoolSat CS-LNBC lnbf, and DiSEqC 4x1 switch. I have put everything together, lnbf to rotor, rotor to port 1...