Search results for query: *

I finally got it working!!! I had to scrap the idea of using USALS because when I put in the infor for my location it was always about seven degrees off. Tried resetting everything and still over seven degrees off. I used the DISEQ 1.2 commands and just manually ran to each sat. I have...

I just found out that this motor does not "move" back to zero, I have to drive it to zero then reset it. Makes to sense to me but I can get this done. Am I making a mistake of using the USALS drive for the system? Would I be better zeroing then reaiming then then just using diseq commands?

Ok, I have tried to rest the motor and I used a piece of 12 guage copper wire and nothing happened. Do I need to use something smaller? Also I have an IV-200 PRO VisionSat and I cannot find the GOTO X function spoke of in the manual. If I could get the motor to zero and reset it i think I...

Lak7, Do I reset it when it is powered or when it is unpowered and move it back to a locked spot by hand? Thanks for the info!!!

I have an SG6000 motor, is there a way to set it back to zero? I am thinking that maybe the issue is that it was not at zero when I started and thus it got messed up. I am almost posotive that the elevation difference for the 107.3 versus the 105 is nearly the same so if I can get the motor...

Ok, I got help from a sat guy who has a super buddy meter and we locked the 107.3 sat with most trandsponders at 85% or better. Went into the house and set up the reciever USALS then hit ok to "go to reference". We went back on the roof and realigned Hit the 107.3 again and locked it as good...

Ok, so just to make sure, you guys do not see anything wrong with what my settings should be, right? I have a crappy compass and think that may be partial issue but I do have a meter and if I can get the elevation johnny on the spot then it is just a matter of swinging left and right. I will...

All, First hello to all of you, I have never posted before. Great site with many helpful posts. Here is my issue, I have never done this before but I am technically inclined and I (believe) that I have followed the instructions as given. My location is in Longmont, Colorado at near 40.2 N...