Search results for query: *

i want the hopper 3 upgrade

Thanks Titanium.

Is there anyone that still have one of the older loader versions for the asc1 in their archives?my firmware version is 20140401.1, I never got around to do any of the updates. Titaniums website only has the later version which is not compatible with the older firmwares...

that was not the case for me, I left it it alone for almost two hours and still was on boot. is there any I can get back the amiko software and satellite app so I can get back the north american satellites? Thank you.

I was downloading the 2.55 dev rom when all the sudden a powersurge happened a liitle past halfway the download, now the receiver stays stuck on boot with no picture on the screen. Is there anyway I can restore everything back to normal? Thanks. (update), figured it out

Thanks for the advice fellas, an actuator on the eastern end will work for me, right now in the market for a 24 incher.

I want to get from 31.5w to 139w on a 5 foot prime focus dish, what length actuator would I need to make this happen? Thanks.

found a dmsi multiswitch in the closet, both polarities are working.

is there a particular brand and model# multiswitch I should get?

just received two norsat lnbs with a chapperal dual feedhorn, my question is how do I connect the two lnbs to the micro receiver since it only has one lnb input?

Hey thanks.

Do anyone know where I can purchase lnb arms and a pole bracket for a 4 foot prodelin dish?

Thank all for the great responses, I actually went and bought a 6" long needle nose plier which worked perfectly. I did not have to squeeze the pliers to tighten it and all the signals came back in its full glory.

Is there a tool I can use to tighten the coax thread on sg 9120 motor? I lost all signals on the lnbf due to the loose thread.

It was on the thread "Problems receiving TuVes HD on Telstar 12 at 15W" in which the poster superj2 was having the same problem.

That how I have my setup, the azbox and openbox thru a power pass spiltter on a motorized dish. Only one receiver on at a time.

One other person on another thread had the same problem as me.

a fan would definitely help the openbox for the high SR, the funny thing is the openbox does not get hot. so far with the portable fan placed over the receiver the quality signal is very stable on 45000 SR freq.

For those who are having problems getting the Testar 12, 15 west high sr like 45000, put a fan over the receiver,turn it up on high and watch the quality go up with a few picture breakups. My belief is that the chip in the receiver overheats only on the high symbol rates and still plays fine on...

I am having the same problem on the High symbol rates on telstar 15 west, they come in for a minute then blank.

I am planning to put a 1.2 meter motorized dish on my angled townhouse roof, Is there anyone here that has the same setup? if yes, what type of mounts are being used. thanks.

I haven't, but I will check it out, Thanks.

is there anyone professional in the northern virginia area that can install a motorized ku band dish on a roof?

just applied, like to test it out

picked up the i-sonic from tweeter yesterday. the hd radio part of the system is pretty good so far, and in my opinion reception sensitivity is very good using a indoor tv antenna.