Hi Doctor
When you plug the LCC into a HR54 a screen will come up saying it has found the LCC and proceeds to OTA setup. I got nothing when I plugged into the HR24. I did not look further.
SSTV
Hi All
I went back to the 54 from the 17. My system is now a hr54, hr24 and a c41 mini. Best operating system I ever had. I had no problem with DTV swapping me back fro the POS 17. Been with DTV since 94.
SSTV
I have had the Genie 2 since last Oct. I have the latest software (1037) and it seems to be a little faster but ALL the other problems are still there. picture freeze,runaway remote etc.
SSTV
Hi All
I still have a problem with the GUIDE. When scrolling thru the guide, both vertical and horizontal, the guide will take off like a slot machine. I replaced my remote just in case it was hanging up but that did not help. What gives?
SSTV
After reset, the top light turns white and you hit and hold the button until the white light starts blinking then release the button. I think we are both saying the same thing.
SSTV
To recap. The HR54 was hooked to the red port on the splitter .The other red port went to the lnb. The remaining port on the splitter went to the HR24. Last night both the HR54 and the HR24 were operating ok. Today I turned on the HR54 and all was well. Later in the day, I turned on the HR24 and...
Hi all
I need information on the correct wiring of a HR54 and a external PI. I know the HR54 has a internal PI but can be used with a external PI.
The info I get on the internet is somewhat confusing. Thanks
SSTV