Search results for query: *

FYI, although most of the 2,190 North American online radio stations in the Online radio player should be working, there might be a few which don't work. In certain cases. some of these dead links could cause the receiver to freeze and require a reboot by holding down the power button. If you...

That was true with some of the older firmwares but not with the latest release. As firmware version 2.03 was released less than 12 hours after you made your post, you first have to give them a chance to test the new firmware out. Also, why aren't these so called "current users" that you are...

Did you try rebooting your receiver?

For this release, it will show 2.03 KFL release in the firmware version page even if you flashed the 2.03 UFL release so there is no need to worry. Both firmwares are the same but the UFL release does not include the 2.x series Firmware / bootloader. As you were already at the 2.x level, there...

You don't have to worry about me stealing anything from your collection of "unofficial" IPTV streams as we will only be adding official legitimate IPTV channels to our STB's.

That explains it as the wifi button will only work if you have the WaveFocus wirless USB adapter plugged in. Your Netgear WNCE 2001 wireless bridge is actually considered as an Ethernet wired connection for any device that it is used on including your AzBox Ultra.

Correction on the above instructions, it should read as follows: The preserve user settings option can only be used under the 2.x firmware level after the 2.03 KFL Release has been installed when upgrading with future 2.x platform firmware upgrades.

Actually to be honest, I did not even have to use Google to find this information. Just had to go to satelliteav.com and clicked my way from there in order to find the above posted information within a few minutes. This was only done after the release of firmware versions 2.03 and 1.87 which...

I'm sorry but you have no right to make such a statement as you never had a chance to try the latest 2.x firmware versions and using firmware of almost 1 year ago. I believe we recently received the unit you returned to StarOne Satellite and it only took about 30 seconds to fully recover it...

I find it quite surprising that you would do a total 180 to a company you founded in order to accuse them of cloning some of the C-band PLL LNBF's your are selling rather than collaborating with them with some sort of private label sales agreement. Do you have a patent registered under your...

The only BS here is you claiming that you have no more involvement whatsoever in Satellite AV / Glorystar. Unlike other people, I never make accusations unless I have some clear unbiased proof in order to backup what I'm saying. In this case, there are a few online references which still state...

AzBox Americas is proud to announce the release of firmware versions 2.03 and 1.87 for the AzBox miniMe American Edition. These releases now enable users to either upgrade or downgrade to and from 2.x and 1.x series firmware and adds enhanced data verification during the kernel / bootloader...

@ updatelee: Thread hijacking is rude and bad netiquette. If you want to discuss a different topic, please start your own thread.

Will be releasing firmware versions 1.87 and 2.03 later on today which both include enhanced error checking of the bootloader / kernel partition when flashing. This should resolve the issue that some users are experiencing where the receiver fails to boot due to the new bootloader / kernel...

Did you try the above yet? If so, please post your results.

Yes the AzBox Elite and Ultra have plug & play support for the WaveFocus wireless USB adapter. It also works for the Premium and Premium Plus as well should you wish to enable support for "N" networks as the built in wireless in these models only supports "B" or "G" networks. The only...

The Netgear WNCE 2001 should work fine on the AzBox Ultra assuming it is properly configured as it is a simple wireless bridge that works on any device with an Ethernet port. Try going to the Internet option in Setup then after making sure IP Setting is set to Dynamic IP(DHCP), select the Setup...

No need to compile any drivers as long as you get the WaveFocus Wireless B/G/N USB adapter which works out of the box on the AzBox Elite, Ultra or even Premium if you remove the built-in B/G wireless module. Just plug it in to any USB port and you will be able to scan for and configure wireless...

The WET610N will also work with the miniMe as it is a wireless Ethernet bridge. You could also use a pair of powerline Ethernet adapters and avoid using wireless completely. However unlike the WaveFocus wireless USB adapter, you won't be able to scan for and configure your wireless network via...

Yes, the WaveFocus wireless USB adapter enables 2.4 GHZ wireless B, G or N connectivity for any AzBox HD receiver that does not already have built-in wireless which includes the AzBox miniMe American Edition.

We are already aware and were able to reproduce this issue. It is not related to changing satellites but rather tuning certain transponders. This is already fixed in firmware version 2.03 which is currently undergoing final testing and will be available very soon.

Please, will you guys knock it off?!? You don't see me posting stuff like this such as Brian still owning a portion of Satellite AV / Glorystar or even bashing Titanium products because that's not my style so I respectfully ask for a little bit of respect! There's only a handful of people out...

When did you send it? They usually reply to all emails within 48 business hours.

Please contact the dealer where you purchased your unit from in order to arrange for a warranty repair. The dealer will provide instructions on how to proceed. Thank you

Considering that this issue is fully covered under the unit's 2 year warranty, there's really no need to post something like this. Billvector's issue will get resolved no matter what at no cost to him.