Search results for query: *

So far I am still getting 0 signal strength for quality. While attempting to connect to AMC 3, I have moved my dish from 180 degrees to 210 degrees, I've adjusted the elavation from 56 to 60, and my pole is plumb. My receiver is configured as follows: Satellite=AMC3 LNB Power=On LNB...

Al, Should it matter what the receiver has it set to. I removed the rotor and I am moving the dish by hand. Jim

Thanks for your help so far Pete, but I'm still not getting anything. How do you think I should troubleshoot this, maybe there is a bad piece of hardware involved, but I don't have any extra receivers, LNB, etc. I already removed the rotor.

On the antenna config, should I have LNB type set to standard or universal? I have a Fortec Star LNBF R.F. 10.7-12.75 GHz L.O. 9.75/10.60 GHz And what should the settings be for LNB high and low or LNB freq depending on type? Also, do I need to have a coax cable for LNB connector, there...

Preceding with 0 didn't make a difference.

Has anyone ever seen a viewsat receiver work?? I have looked thru many threads and it seems like a lot of people are having the same problem I am, but the threads seem to die without any resolution. Robert from FTADirect told me that this was the best recevier out and very easy to setup, yet...

Still failing... Could it be because I'm entering 2449 for SR rather than 2.449? I didn't see any way to enter decimal. Also, is there some sort of signal meter on the VS2000?

I took off the rotor and I'm setting the dish to the coordinates you gave. However, when I manually search for channels on AMC-3 using these numbers, it is still failing. 87.0 West AMC-3 H-11712 0962 7/8 02.445 4130 4131 TIP TV H-11716 0966 7/8 02.445 4130 4131 THE PATIENT...

I received a viewsat package from ftadirect with a vs2000 receiver, a stab hh90 rotor, and a 80cm fortec star dish and I cannot get a single channel :confused: I live in zip 34287 and I seem to get a signal from a lot of the satellites, however, when I try to do a search for channels, it...