Search results for query: *

...thanks again for the helpful tips. Sounds like I've got a lot of tweaking to do. I just can't seem to break away from a QUALITY of 7% as of yet. For the most part, I've done everything mentioned above...I'll keep messing with the alignment though. ...to be continued...

...thanks for the advice. I'm also assuming that the dish signal is not properly "peaked". I'm obviously getting a signal (~97%), and some quality (~7%) off of G10R. A couple of questions that I haven't addressed: 1) At what point will the receiver recognize the channels? 2) Does the...

...I'm stumped. Skewing the LNBF didn't increase OR decrease the signal quality meter. Stupid question, but does it matter which connector the cable is plugged into the LNBF? It's a dual... I tried blind scanning with the LNBF as far away, and as close to the dish as possible. Result = still...

...Okay, I'll try skewing the LNBF... Here are the settings from the receiver: Satellite: Galaxy 10R Frequency: 11.719 GHz(V) LNB Power: On LNB Type: Singe (I have the option of chosing Universal and OCS) LNB Frequency: 10.750 ...to be continued...

Pete, As per your suggestions below, I cannot seem to get a QUALITY above 7%. FYI - signal level ~ 97%. I've tried both an autoscan and a blind/smart scan on Galaxy10R, and nothing. Am I overlooking something obvious? I definitely have a clear line of sight...clear skies out here at the...

...still working on the install without the motor... To answer your question, here is the motor description: Stab Rotor SAT HH90

...okay, I'll try the install without the rotor first...let's see what happens...

Thanks for the prompt reply Pete. Pardon my ignorance, but what do I do with these angles? I tried looking at this information from the "Satellite Finder" software, but it's gibberish to me... - f

Greetings, ...just purchased the "CoolSat 4000 PRO Universal Package" from gosatellite.net . Package includes CoolSat 4000 PRO with 33" Dish, Dual Standard FTA LNBF, Rotor, 4x1 DiSEqC Switch and 9 Pin Serial Cable. I also purchased a 3 ft. tripod and 5 ft. mast to go with it (both from radio...