Search results for query: *

Did you try rebooting your receiver?

That explains it as the wifi button will only work if you have the WaveFocus wirless USB adapter plugged in. Your Netgear WNCE 2001 wireless bridge is actually considered as an Ethernet wired connection for any device that it is used on including your AzBox Ultra.

Yes the AzBox Elite and Ultra have plug & play support for the WaveFocus wireless USB adapter. It also works for the Premium and Premium Plus as well should you wish to enable support for "N" networks as the built in wireless in these models only supports "B" or "G" networks. The only...

The Netgear WNCE 2001 should work fine on the AzBox Ultra assuming it is properly configured as it is a simple wireless bridge that works on any device with an Ethernet port. Try going to the Internet option in Setup then after making sure IP Setting is set to Dynamic IP(DHCP), select the Setup...

No need to compile any drivers as long as you get the WaveFocus Wireless B/G/N USB adapter which works out of the box on the AzBox Elite, Ultra or even Premium if you remove the built-in B/G wireless module. Just plug it in to any USB port and you will be able to scan for and configure wireless...

When running the 2.x firmware versions, you can only downgrade to 1.x using a KFL format firmware which contains the kernel. Once downgraded to the 1.x level, you would then be able to install any of the old IMG format firmware versions. We will release a 1.x. KFL version right after the 2.03...

Your Internet speed is irrelevant in regards to this as the traffic would normally never leave your LAN. I currently don't have access to a skewed dish for 103 at the moment but 105 C-band should be a similar type of stream. Please try using VLC with both your STB and laptop connected via a...

Just tried with the NBC MUX on 105W and have no issues using VLC full screen on a Dell Inspiron N5010 laptop using a wired 100 Meg connection. However, I was not able to stream this channel properly using WiFi or on an older laptop. Keep in mind that the stream just gets passed on to your PC's...

Should make no difference if it's MPEG2 or H.264 as it's the PC that's doing all the decoding so it will work as long as the PC has the proper codecs installed and is powerful enough to handle the task. This is nothing special as any STB which supports streaming the currently tuned channel over...

No problem scanning and receiving both ABC NewsOne Live1 and ABC NAC CH2 on all AzBox models as far as I know. On the miniMe American Edition, I can even tune and stream either of these two channels to my web browser or VLC player using the receiver's web interface.

We will look into bumping it up a bit more in a future firmware update. Keep in mind that you can only go so high before starting to get distortion. The main purpose of this feature is to turn down the audio level on channels where it is being broadcast at a too high level.

As I already explained previously on this forum with that post you quoted, I was involved with Dr. Sat when they first started operations back in 2009 where I assisted in the foundation of the company as a senior manager. In order to assist getting the company up and running, I invested money...

After having the chance to tune the dish we are using over here bit more, I was able to replicate the 0 quality bar issue. It's essentially a cosmetic issue which happens when your quality level is too high for the meter to handle so please give yourself a pat on the back for having a well...

As SatelliteGuys member Keith Brannen has posted, this is untrue and nothing more than a big white lie coming from an AzBox clone seller! You may have fooled a few individuals but most people are smart enough to know that lenny500 = rooneysat = sat_boy = cbandguy = cbandsat = thecbandguy =...

This solution only works for channels which the user never watches so it does not really address the issue at hand. Rather than changing the audio pids to something unused, the better solution is to reduce the volume on them which the miniMe American Edition allows you to do. Yes, each audio...

Hey Mr. Grammar Nazi, ever hear of replying to a post in context? Cham stated that he currently has an AzBox Ultra which also does not support 4:2:2 chroma subsampling with H.264 channels so the miniMe American Edition is a viable replacement option. P.S. You forgot a colon after the word post...

Not the only option as you could get miniMe American Edition STB's to replace them which supports 4:2:2 as well.

The AzBox miniMe American Edition already has this feature implemented where you can adjust and save the audio level for each individual channel from 1% all the way to 115% with a default of 100%. Essentially, you would turn down or increase the level on any channel which does not broadcast...

I fully agree with you as the open areas of this forum are heavily indexed by all major Internet search engines. At the very least, this thread's title should be edited in order to remove the offending keywords.

Now that stability and performance issues were addressed with the release of 2.x firmware, we now have a good foundation to start focusing on adding user features such as being able to delete transponders from the satellite list. Keep in mind that the satellite list and transponders was updated...

Were you able to run the script we sent via PM in order to recover your receiver and enable upgrading it to the newly released 2.02 firmware version? Most of the issues you previously reported have now been resolved in that version so calling the receiver junk is unwarranted for. If you are...

The AzBox miniMe American Edition is your best option for live 4:2:2 support on a STB either direct on your TV and/or streamed to any PC on your network from your web browser or VLC player. This enables you to start watching a show on your TV and continue watching off your laptop if you must...

As you were never an AzBox distributor, how can prove that the statements you made are true? Are you simply using T134's hearsay as fact? How can you make such statements with GeoSatpro support being abandoned once you started Titanium and jumped ship to supporting an STB competitor's brand...

It really only impacts the 2nd generation Ultra or Premium HD Plus models as the 1st generation Premium HD or Elite models don't have true hardware blindscan.

We had reported this bug to OpenSat quite a while back before the Premium HD Plus and even the Ultra model got discontinued and it was supposed to be fixed. However when clones started getting introduced into the market (not only the P+ in NA but Ultra in Europe as well), development was put on...