Search results for query: *

I'm using a merc II ver 1.39 Mar 2 2007 and also get invalid parameter when trying to manually add the transponder.

there is no scan available for DVB under Linux that I am aware of so you need to enter each transponder frequency and symbol rate. It will scan the transponder and usually find all the programs/channels sent on it. It sometimes has problems getting channels on transponders where they are not...

I have a working DVB-S setup using Knoppmyth and a 102G card so I may be able to help. I have my computer set on the pass thru from my set top box since it does not seem to correctly set the LNB voltage to control polarity. Possibly you are running into the same situation which is why you are...

KnoppMyth & VLC KnoppMyth comes with VLC preinstalled :eureka There is save/stream capability in VLC but I have not used it. Looks like it will save either the entire transport stream or just an individual program. It also has setting for transcoding what it saves to a different codec.

4:2:2 & Mythtv Note that currently MythTV does not support 4:2:2 HD. 4:2:0 support is excellent. I'm using a Twinhan 102G card in my MythBox on a P4 3.2 Ghz 512MB RAM and a Nvidia Gforce FX 5200 and have no problems with HD playback. The card supports 4:2:2 it's just the playback used by...

I'd go for the Visionsat IV-200...already have a Mercury II

My local electronics store (Unicorn Electronics) has a decent selection of 5-2050MHz splitters with the grounding block...prices aren't too bad either. They are "Philmore" brand.

I got my C-Band dish back up over the weekend and the HD channels on there work great. Picture is better that what I get on the HD channels on cable. Even better is there are HD channels that I cannot get locally. Now I'm going to need to get a bigger drive for my MythTV box. At 12GB+ an hour...

all I can find on 12545 is CBCHE:12545:V:0:20000:4369:4372:802 which appears to be scrambled. I can hear audio and get the guide info for this channed which makes me think it is not the HD Demo. when I try 12545:V:1:200000:4385:4386:829 I can only get a partial lock. Can someone confirm the...

Can anyone confirm that there are currently FTA channels on Nimiq2 82.0W? I have my dish pointed there, Mercury II shows [BellExpressVu 82.] in antenna setup when on active transponder, but can't seem to pickup any FTA. My SQ is a bit low because it's partially obstructed by a tree but I've...

oh well...guess that's more motivation to get my C-Band up again.

I just got a Twinhan 1025 and wanted to check out the HD demo channel on 61.5 to see how Mythtv handles HD video. I currently have a DISH500 setup at 110/119 and would like to move it over to 61.5 temporarily. What elevation and skew should I be using. Zipcode 13760. ps: can't use my cband...

I'm trying to figure out how to hook up both KU and C-Band on the analog GI 650I with my setup. What I have currently setup id a BUD with C and KU band LNBs that are fed into a 4 port diseqc switch . The Diseqc is connected to the Mercury II. The Mercury II works fine for receiving both C and...

Endicott, NY USA

yes it definitly has optical input. As I stated it works fine for sound on the non AC3 channels from the Mercury II. It will also work with Dolby Digital over optical from a DVD.

yes, I get sound over optical on all channels except for the AC3 channels. With the SPDIF setting in the menu set to ON I get the clicking noise on the AC3 channels when connected to the amplifier, on the tv(my tv has optical input) it is muted. With it set to OFF the sound is muted on the AC3...

No luck I have the same problems with the AC3 on AMC4 101W. My SQ is between 65 and 70 on AMC4 C-Band at the moment. I have set the SPIDIF Output to On under the TV setup menu on the Mercury II...anything else I need to do to enable AC3? dougruss, What S/W and H/W version do you have? Model...

Catoer, Any luck on the AC-3 Audio from the Mercury II? I still have not been able to get mine working. On the TV the sound is muted when it hits a AC3 stream. the Sony receiver make a loud clicking sound on them. Both work fine with Dolby Digital from a DVD and the non AC3 channels over...

I also have a Mercury II that has problems with AC3 audio. Mine originally had the 1.06 software on it and I have upgraded to 1.29 and still cannot get sound on the AC3 channels. I have tried attaching the optical out to both my Sony receiver and LG HDTV and neither one works. Non AC3 channels...

Note that not every receiver that can do Dolby Digital is capable of AC3. I have a Sony STR-DE915 that refuses to work on AC3 channels from my Fortec Star Mercury II. All I get is a clicking sound. Non AC3 channels work fine over the optical from the Mercury II. The Sony Receiver also works fine...