Search results for query: *

I Want to Win!! Sent from my ONEPLUS A3000 using the SatelliteGuys app!

I Want to Win a Free DVBS2 Receiver

Unfortunately same thing I thought about that minutes after I posted....

Hi Everyone, Interesting issue I used to use my Manhattan RS-1933 with my Vizio E470i_A0 50in HDTV for months I've been using an Amiko A3 on HDMI #2 recently I switched back to the Manhattan but I'm getting a message Reading Data... then it goes to No Support. Output through the RCA jacks...

Yup still no go it doesn't acquire an up either new or it's previous one I have 72 hour leases on my centos dhcp server.

Any update on the no video issue or am I to pack it up to send to Canada?

I had 1.86 and did the internet update, I just pulled it back out and checked it, I get the blue led but it never goes orange nor does it send any video output to HDMI or RCA connections. Safe mode via holding the 1 key on the remote gets nada as well. Any suggestions?

pwrsurge, I'll give that a shot tomorrow when I have some free time. When I did the update yesterday it applied the firmware and kernel without error then froze at the end of the process instead of rebooting (BTW I didn't retain my settings)....I let it go for 30 minutes or so and came back to...

I hope because 2.00 basically bricked my unit....

I'll take a few pictures in the morning. The dish itself is skewed about 23 degrees and the lnb is in a mount where I can fine tune it. Sounds like I've been using the wrong lnb to aim though.... Posted Via The FREE SatelliteGuys Reader App!

For the initial setup I'm not using a switch I'm set for universal 9650/10600. I'm doing my alignment with the right lnb (looking at the dish face) aiming for 97w. Alignment is good as I can get the weaker RT transponder. Disconnecting the right lnb and going to the left should yield me 101w...

Hi folks, I've purchased a WS esx521u-am adjustable lnb and I've got some difficulties with hitting 97w and 101w. I can hit either SATs fine on either lnb without difficulty but I can't get both is there any tips out there? BTW I'm using a au9 slimline to do this since it was free and I figured...

Guess there's no solution... Guess I'll need to connect the Manhattan rs1933 somewhere and just control it via remote extenders. Posted Via The FREE SatelliteGuys Reader App!

Hi all, I got an azbox Minime NA Edition I've recently decided to connect it to my motor using USALS. I'ev entered the my coordinates and the motor works as expected but I'm getting aimed at the wrong sat. There's a few more settings such as move on 18V and Motor moving speed. I have the 18V...

Though I have yet to record on the Amiko A3 it supports dlna and mounting network drives with a sufficiently fast network ie gigabit and remote storage offering NFS, samba and dlna you could easily implement something with xbmc, roku or anything else that can stream mpeg4 and mpeg2. You'd come...

Shipping is my biggest concern getting a 36in geosatpro wasn't cheap once that figure was added. I've seen 6 to 8 ft dishes for sale in various places but shipping doubled the price yuk! Posted Via The FREE SatelliteGuys Reader App!

Hi everyone, I've gotten pretty good with my ju setup with multiple dishes, mirror switches etc. I'm about to upgrade to C band either purchase something new or rehab an older setup if the price is right. I'm located in NEPA an 40 minute drive to Allentown, Scranton, and Wilkesbarre if there's...

Looks like it's a no go: http://www.raspberrypi.org/forums/viewtopic.php?f=29&t=34663 Posted Via The FREE SatelliteGuys Reader App!

Possibly http://wiki.xbmc.org/index.php?title=Raspberry_PI_FAQ "H.264 (up to High Profile)" Posted Via The FREE SatelliteGuys Reader App!

Hi folks has anyone noticed any strange breakups on 121w? I'm using an azbox minime and Manhattan rs1933 both are experiencing breakups and pixelation on my converted dish 1000.4 eastern arc dish with a avenger lnb. If I switch to my motorized dish with 90cm geosatpro dish I'm not experiencing...

So sleek black :) Posted Via The FREE SatelliteGuys Reader App!

I can vouch for 72w just a quick 5 minute swap to a linear lnb and matching bracket. Instant nbc 71-72 quality in northeast pa near Allentown Dan

I just purchased the MiniMe and it came pre-loaded with 1.50 (nice) I have to agree on the comments about the blindscan but not for speed. It picks up more TPs than my RS-1933 even 103w with the oddball skew on a 0'ed LNB however if the channel doesn't have a provider the channel is ignored I...

No problems in Jim Thorpe area in Carbon county 90% signal 74% quality motorized ws7630, qph-031 on a Manhattan rs1933 Dan

dougruss: I have it connected exactly in your diagram, my switch handles up to 500mA I'm not sure what the motor is rated at but I'm sure it's higher than half an amp. I've also swapped the DiSEqC switch for a 22Khz switch with the same results so I'll try moving it with the LNB disconnected but...