SES-1, H&I Mux Gone??
- Thread starter towerdude
- Start date
- Latest activity Latest activity:
- Replies 22
- Views 3K
- Status
The 39xx TPs went dark today, but the these TPs are active:
H&I - Active 3744 / 3733
Decades - Active 3748
Movies! - Active 3765
Start TV - Active 3704 / 3708
H&I - Active 3744 / 3733
Decades - Active 3748
Movies! - Active 3765
Start TV - Active 3704 / 3708
Last edited:
Down for me too, even tried reaiming my dish.
And for me, Bounce, Grit, Laff Mux is down on 97W too.
But my other regular channels on both sats are coming in strong.
And for me, Bounce, Grit, Laff Mux is down on 97W too.
But my other regular channels on both sats are coming in strong.
Thank you. Got em back.....Interesting the local movie channel affiliate lost his for awhile today...
OK, I did a blind rescan...
Now Getting:
Start on 3705 V - 2733
Start on 3709 V-2733 (scans in as Ch-1)
H&I on 3734V -2733 (scans in as Ch-1)
Heroes on 3745V-2733
Decades on 3749 V -2733
Movies on 3765 V -2733 (Scans in as CH1)
My receiver usually scans in the frequency as 1 higher than lyngsat lists, and SR as one lower, so if you are entering TPs manually, adjust the numbers as your receiver may need.
Now Getting:
Start on 3705 V - 2733
Start on 3709 V-2733 (scans in as Ch-1)
H&I on 3734V -2733 (scans in as Ch-1)
Heroes on 3745V-2733
Decades on 3749 V -2733
Movies on 3765 V -2733 (Scans in as CH1)
My receiver usually scans in the frequency as 1 higher than lyngsat lists, and SR as one lower, so if you are entering TPs manually, adjust the numbers as your receiver may need.
I posted about where's H & I TV.
My receiver is GEOSAT PRO PVR-3500 HD reciever, after
the MicroHD version.
Are they back??? Do I have to re-blind scan, again????
HELP??? I want to watch STAR TREK Originals and collects them
onto my DVDs.!!!
I'll check it later before Pacific time. Dammit!!!
Eugene
My receiver is GEOSAT PRO PVR-3500 HD reciever, after
the MicroHD version.
Are they back??? Do I have to re-blind scan, again????
HELP??? I want to watch STAR TREK Originals and collects them
onto my DVDs.!!!
I'll check it later before Pacific time. Dammit!!!
Eugene
I posted about where's H & I TV.
My receiver is GEOSAT PRO PVR-3500 HD reciever, after
the MicroHD version.
Are they back??? Do I have to re-blind scan, again????
HELP??? I want to watch STAR TREK Originals and collects them
onto my DVDs.!!!
I'll check it later before Pacific time. Dammit!!!
Eugene
You need to rescan or manually enter the freq, symbol rate, etc.
I posted about where's H & I TV.
My receiver is GEOSAT PRO PVR-3500 HD reciever, after
the MicroHD version.
Are they back??? Do I have to re-blind scan, again????
HELP??? I want to watch STAR TREK Originals and collects them
onto my DVDs.!!!
I'll check it later before Pacific time. Dammit!!!
Eugene
Eugene, yes! Rescan!
I also have to rescan on my 9000I but only to delete both new and old muxes!
After the new scan, I can rename all those CH-1s to what I had them named to before!
I had that happen, and reflashed it again with the last released firmware. Fixed it right up.
Thanks guys, I rescanned and got them back at the new frequencies. Maybe this will fix the stutter-season permanently. Hopefully this will also fix the Movies & Start Tv swap issue.
I GOT IT!!! THANK YOU!!!!
I re-blind scan it.... NOW I can watch STAR TREK
Originals TONIGHT at 8 PM PDST, because I missed
on the EAST COAST.
I can also re-name the channel as well.
H & I East
H & I West
Because the receiver just shows "NO NAME".
THANKS!!!! GLAD TO COME ABOARD TO ASK FOR HELP.
I REALLY NEEDED IT, BECAUSE OF "STAR TREK", DON'T WANT
TO MISS IT. Otherwise, they re-tuns on MeTV only on Saturday night.
Thanks, again
I re-blind scan it.... NOW I can watch STAR TREK
Originals TONIGHT at 8 PM PDST, because I missed
on the EAST COAST.
I can also re-name the channel as well.
H & I East
H & I West
Because the receiver just shows "NO NAME".
THANKS!!!! GLAD TO COME ABOARD TO ASK FOR HELP.
I REALLY NEEDED IT, BECAUSE OF "STAR TREK", DON'T WANT
TO MISS IT. Otherwise, they re-tuns on MeTV only on Saturday night.
Thanks, again
Reflashing didn't fix the problem. Oh well, I didn't like it anyway. Hopefully, I'll win the Mio but in the meantime I'm using an Azbox Elite until I can budget for another STB.
This is a step-up from the MicroHD, though IMO it's not as versatile as the Mio, but it is 1/2 the cost if you are cost conscious: https://estsatellite.com/shop?olsPage=products/amiko-mini-hd265
I own one myself.
I've had 2 Android based receivers and I'm not impressed with either one. I'm going back to Linux based receivers because I've had better luck with them. So I won't consider the Amiko. I'd rather pay $500 for a receiver that does what the specs say it'll do than $100 for a receiver that won't do everything the specs says it will do (and the vendor has no interest in fixing issues). Getting better support from the vendor would be a big plus also. One of the things I'd like to see in a receiver is a wireless remote control along with IR control. I want to remote the receiver and dish controller together in a remote room and then stream to a TV via wifi or ethernet. Heh, none of what I want to do is a "slam-dunk" or cheap.
Two different C-Band dishes. Both pick up Me-TV without any problem. So I am on satellite. Both picked up H & I, Movies, etc. in the past. Recent scan and nothing. Dead, zero. Does not add up. ??? But Me is still there.
- Status
